Tubeless repair kit BioFibre

Developed alongside World Cup mechanics and world champion riders. Peaty's Holeshot Tubeless Sealant is filled with biodegradable fibers and sealing particles to give a strong rapide seal. Using the latest latex action rapide, our water-based sealant is ammonia-free, non-hazardous and lasts up to 6 months in the tire in temperate climates*. It does not swell in the tire and is easy to wash out. Our biodegradable fibers and particles bind with action latex rapide to create a clot (like platelets in your blood) to quickly and effectively seal holes and tears up to 6 mm.
Key features:
- Biodegradable sealing fibers
- Biodegradable platelets
- CO2 compatibility
- Seals up to 6 mm holes
- Operating pressures: 15 to 120 psi
- Operating temperature : -20°c to +50°c
- Seals porous tires and bead/rim gap configurations
Set-up instructions:
Always make sure you have tubeless-ready rims and tires. For best results, use Peaty Tubeless rim tape and Peaty Tubeless valves.
1. Shake bottle vigorously before each use to ensure even distribution of fibers and particles.
2. Rinse any old sealant from the tire and dry completely. For new tires, degrease, rinse and dry the inner casing to remove factory release agents and autres contaminants.
3. Install your tire on the rim and inflate it first without sealant, using a track pump, inflator or compressor to press the tire bead completely onto the rim.
4. Deflate the tire and, with the valve in the three o'clock position, use the flexible injection hose supplied to inject the desired amount of sealant directly through the pitted valve.
5. Reinsert the valve shell and reinflate the tire to the desired pressure.
6. Distribute the sealant inside the tire by rotating the wheel and tapping the tire on the ground.
7. Watch for any air leaks and rotate the wheel so that the sealant flows inside the tire to the required area. Continue until you hear no more air loss **
8. Wash off any excess sealant from the outside of the tire or rim with
water.
9. Check tire pressure and drive!
Minimum recommended quantities per tire :
- Road 30 - 45ml
- Cyclocross 60 - 75ml
- 26" MTB 60 - 80ml
- 27.5" MTB 70 - 90ml
- 29" MTB 100 - 120ml
For larger rim/tire combinations and/or extra protection against punctures, we recommend adding up to 30ml of additional sealant to the above quantities.
* Always check sealant regularly and top up if necessary
** If a repair cannot be made, add more preventive as required