Controllers Sram Rival22 Hydraulic Disc Front Brake 950

Road shifters Sram Rival22 Hydraulic Disc Front Brake 950.

Features:

• Tool-free contact point adjustment
• 28 mm tire clearance and compatibility with Zipp Firecrest® rims (27.4 mm)
• Forged aluminum arms with SwissStop® pads - New interior and exterior design
• Revised ergonomics for better finger wrapping and revised shift paddle for better finger clearance
• Individual reach adjustment
• Forged aluminum brake and shift levers
• Low hand force required
• Fully sealed system to prevent contamination
• Easy access to bleeds
• Use this 11-speed shifter for SRAM Road 1x and 2x transmissions

Specifications:

• Weight: 422g per wheel (lever, caliper and hose)
• Speeds: 11 rear / 2 front
• Compatibility: Force 22, Force 1, Rival 22, Rival 1 HRR & HRD, Yaw™ front derailleurs, Exact Actuation rear derailleurs
• Recommended group: SRAM Rival® 22
• Technology(ies) highlighted: HydroR/ Connectamajig™ / Yaw™/ DoubleTap™/ Zero-Loss™ front & rear/ ErgoDynamics™ Fit/ E-Z Access Reach Adjust independent brake-shift lever
• Finish: Grey & black anodized finish, textured covers
• Material: forged aluminum arms with stainless steel hardware, aluminum brake levers with aluminum shift levers
• Other: SwissStop® pad compound, DOT 5.1 fluid usage

Technology:

DoubleTap:

• What it is: DoubleTap® is the flagship technology of the road gruppo revolution from SRAM. It's a simple, elegant and advanced system that solves problems without compromising performance, comfort and weight with a revolutionary shift/brake design.
• What it does: DoubleTap® makes shifting easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap lets you shift in and out of gear in one short, fluid motion with minimal effort and maximum comfort, regardless of your position on the handlebars.
• How it works: DoubleTap® uses two pawls, one to hold the ratchet wheel and one to move it up and down when shifting. The pawls are arranged so that they can move relative to each other depending on the distance and pressure you apply to the shifter. The transport pawl (04) moves the ratchet wheel (02) up through the gear range with short, quick presses. Downshifting is accomplished by a longer sweep of the lever (in the same inward direction as upshifting, but at an ergonomically optimized 15° angle), with the holding pawl (03) and the transport pawl following each other quickly and smoothly.
• Location: DoubleTap's single-motion unidirectional levers (05) work perfectly, no matter which position you change from. Its double-jointed design (01), which is completely separate from the brake pivot, engages easily from hoods or troughs. Unlike all other front controls, DoubleTap® also lets you pull the shifter against the handlebars, so you can shift up during a sprint or attack without giving up a firm grip.
• Divide and conquer: On DoubleTap® controls, the brake and shift levers are completely independent, each operating with its own pivot point. This not only allows for multi-position functionality, but also eliminates the risk of inadvertently engaging the brakes or gears-an unfortunate side effect of other shifter/brake designs.
• What this means for you: The efficient, ergonomic design reduces weight and eliminates clutter while adding comfort. You can shift from any position on the handlebars, even while sprinting, giving you a decisive advantage over your competitors. Our new single-lever mechanism also lets you shift faster, easier and more precisely, without the risk of losing speed or grip. DoubleTap® is the cornerstone of SRAM 's road bike offensive. It's a new way of shifting and a new way of thinking that will give you a leg up on the competition, wherever they are.

Connectamajig:

• The Connectamajig™ is the coupling hose that makes the initial setup of hydraulic road braking systems SRAM easy, fast and convenient for the factory, home builder or dealer. The intimidation of hydraulics disappears with a simple push and twist, it's that simple. Connectamajig is available to bike builders and works for RED 22 and S-700 hydraulic systems from SRAM.

DOT 5.1™:

• Heat is the enemy of any braking system, so advancements in heat management mean advancements for your bike. You see, we've found that in our systems, DOT 5.1 takes almost 3 times longer to boil than DOT 4, allowing for seamless, fade-free performance in even more extreme conditions.

EXACT ACTUATION™:

• When we launched our road technology from scratch, we reapplied our mountain bike-proven SRAM 1:1 actuation ratio (shifter cable travel: derailleur movement) for 10-speed rear shifting. The EA simplifies and stabilizes the difficult balance between rear derailleur hanger design, tight spacing of the sprockets and exact cable tension. The result is the easiest derailleur system to set up and stay set up.
• Reach adjustment: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finesse.